Would you like to have a construction calculation made for your shed?
Are you planning to have a shed (partially) built or installed? Then you need a structural design to comply with all regulations and obtain a permit. The construction calculation for the shed guarantees that you can have the shed built safely, professionally and quickly. You will receive a complete calculation report according to national standards, a scale drawing and the data for a detailed calculation for the steel supplier within 5 working days. This means you are well prepared and you have all the necessities in order for the contractor and other parties involved.
Is a construction calculation required for building or renovating my shed?
When building or renovating a shed, the supporting structure of the shed is adjusted. it is mandatory to have a construction calculation carried out and to apply for a permit when carrying out work on the load-bearing structure of a shed. This applies to the construction or renovation of an entire shed as well as to the removal of a load-bearing wall in a shed or the creation of an opening in a load-bearing wall. To prevent these types of dangerous situations, the government has environmental law decision stipulates that there is always a permit requirement when building or renovating a shed. A permit is therefore also required if it is decided to make a door or opening in a load-bearing wall of the shed. The construction calculation for the shed is the most important part of the permit application. Based on this construction calculation, the municipality will assess whether your shed is safe.
What is calculated in a construction calculation for a shed?
In a construction calculation for a shed, a calculation is made of the construction that must replace the opening in the wall. In the construction calculation of a shed, the structure of the shed is analyzed and the forces and loads that the structure must be able to bear are calculated. This is often a combination of a steel beam in the ceiling, a vertical column and/or a stabilizing underlay for the foundation. After making the construction calculation, the constructor processes the calculated result on the construction drawing. Thanks to this construction drawing, the contractor has insight into which building materials are needed and how he should install the construction. You can see this construction drawing as a manual for the contractor.
Why have a construction calculation made for your shed?
A good constructor saves you costs. Our goal as a constructor is to ensure that you receive a high-quality calculation with the lowest possible material costs, while the contractor can carry this out properly. Thanks to the investment in a good construction calculation, you can be assured that the total costs of having the shed built or renovated will be lower.
If you choose to have a shed construction calculation made by Constructiefgoed, you will receive it within 5 working days. Are you in a hurry? Please contact us to discuss further options, we are happy to think along with you!
Curious about the cost? Receive a free quote within 24 hours!
Frequently asked questions about making a structural calculation
What does a structural engineer do?
A structural engineer tests and calculates structures of buildings through structural analysis. Think of bridges, homes, commercial buildings and other types of structures. It is the task of the structural engineer to make a calculation that ensures that the renovation can be carried out safely and efficiently by the contractor.
When do you need a structural calculation?
When you change anything in your home to the existing load-bearing parts, you need a structural analysis. Examples of these parts include; floors, beams, roofs, foundations and walls.
A structural calculation is also required for new buildings to ensure that the construction is safe. Examples of this include; extension, dormer or extension.
This involves making sure your idea is strong enough that it doesn’t end up sagging or worse.
What is the cost of a structural calculation?
The cost of a construction calculation depends on the type of construction and its size. You can contact us for a quote request for your construction.
How long is the delivery time of a construction calculation?
The delivery time of your construction is 5 working days after approval of the given quotation. If there is more urgency you can contact us for the possibilities. We like to think along with you.
Do your structural engineers work throughout the Netherlands?
Our structural engineers work for part of the Netherlands. In most cases we make the structural calculations remotely. If a site visit is still required, we will of course arrange that as well.
What does the structural engineer need for a structural calculation?
Our structural engineers make the structural calculation based on two types of construction drawings. These are the original drawings of the building, which can be requested from the municipal archives. In addition, the structural engineers also need a drawing of the desired situation.
How does the structural engineer make the structural calculation?
So the structural engineer uses two types of building plans to make the calculation. He ensures that all possible loads have been calculated so that no cracks or deflections can occur. In doing so, the structural engineer also takes into account the necessary regulations.
How do I request the structural calculation?
You now know all about the calculation. The last question is how to request a structural calculation. This is actually very simple, you can do this with us! Request a free quote on our quote page.
What information does the structural engineer need for the calculation?
Before one of our constructors can make a construction calculation of your shed, he needs the original drawings of the shed. The construction calculations of the shed in question are particularly important. These construction calculations contain information about the foundation, walls, floors and, for example, the roof.
It is also important for us that you indicate on the relevant drawing whether you want to rebuild or renovate the shed in part or in its entirety. This way we understand exactly what your wishes are.
Want to build or renovate a shed and apply for a permit?
It is now known that you always have to apply for a permit if you want to build or renovate a shed. Even if you only renovate a small part of your shed. Please note: the municipality has 8 weeks to issue the permit. Therefore, make sure that you apply for the permit on time.
Applying for an environmental permit is fortunately not that complicated. You need to apply through the Environment Desk. Then all you have to do is upload your personal information, share a construction cost estimate and submit the construction calculation.
To help you apply for the permit, we created a blog showing you the steps you need to follow to easily apply for your own permit. Not quite sure? Then you can always contact us. We will then schedule a team meeting and one of our designers will help you with your application.
Constructiefgoed makes building or renovating your shed easy
On this page, but also on our blog, you will hopefully find all the information you need to properly prepare for the renovation of your shed (partially or in its entirety). A construction calculation plays an important role in preparation. By making a construction calculation you comply with the regulations, avoid unnecessary costs and ensure that your shed is safe.
We at Constructiefgoed focus on making construction calculations for renovations. Last year alone we made more than 500 calculations for sanding. Our engineers have seen all conceivable situations and solutions. It is partly thanks to this expertise that our clients always receive a good and efficient structural design from us. In addition, we can guarantee that you will receive your permit!
